Payment & Shipping Terms:
|Holding Troque:||1.7-6.8kg.cm||Body Length:||25-58mm|
1.8º 42mm Two / Four Phase Unipolar Stepper Motor Used For 3D Printer
NEMA (17inch)42BYGH(MM)Series two-phase (four-phase ) stepper motor used for 3D printer
Two / Four phase 1.8 degree NEMA17 (42*42mm) Hybrid Stepper Motor.
Shaft length can be customized, and it can be round shaft or shaft with flat side.
We produce stepper motor from nema11 to NEMA 34, and offer you suitable drivers for all these motors.
NEMA 17 1.8º 42mm stepping motor
Model: NEMA17, 42BH, 42BYGH
Phase: 2phase or 4 phase
Stepper Angle: 1.8º
Small Holding Torque
Lead wire no.: 4 or 6 wires
Speed: low or high speed
Our application fields refer to robot, music fountain, industrial electronic automation equipment, medical instrument, advertising equipment, stage lighting equipment, printer, textile machinery, external applicable equipment of computer, CNCrouter, etc.
Temperature Rise--------------------------80℃ Max.
Insulation Resistant--------100MΩ Min.,500VDC
Dielectric Strength--------500VAC for one minute
Ambient Temperature ----------—20℃~+50℃
Shaft Radial Play-------------------------------0.02Max.(450 g-load)
Shaft Axial Play--------------------------------0.08Max.(450 g-load)
The motors are qualified with the CE certificate and ISO9001
1.Working time : 8:00 a.m - 10:00 p.m .Any questions, please tell us freely, we will be reply you asap.
2.Lead time : For samples, 2 to 5 days will be OK. For mass production, the lead time depend on the quantities you need.
3.Warranty period : 12 months and Life-long maintenance service for the product.
4.We accept products customize.
1. We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2. Most orders will be shipped out within 3-7 working days upon payment confirmation.
3. Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
4. Please check the package upon receipt, if there are some damages, please contact us immediately.
Feedback & Refund
1. Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
2. When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
3. Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.
The motors can be designed according to the customers requirements
Contact Person: Elaine Yang